KP Series

OIL filtration SYSTEM


10 GPM (38 LPM)

Part Number KP10-2-S-V636 is a rugged, heavy duty industrial oil filtration system that provides an operator an easy solution for off-line oil filtration service for reservoirs up to 1,200 gallons (4540 liters).  The Model V-636 swing eye-bolt filter vessels are utilized with the KP10-2-S-V636 oil filtration system, and they provide a user friendly solution for filter element installation and removal.   Applications for the KP10-2-S-V636 are lube oil reservoirs and hydraulic oil reservoirs.  These systems can be used on oils up to a maximum oil viscosity of ISO 100 at 100F.  Areas where the KP10-2-S-V636 is utilized are power plants, paper mills, steel and aluminum mills, marine, mining, refinery and other general industrial oil applications.


  • Operator Friendly: The V-636 filter vessel design makes the element change-out procedure quick and simple.  No tools are required.  Element change-out can be accomplished in less than two minutes.
  • Positive Element Sealing: Produces a mechanically aligned and secure seal, preventing fluid by-pass around the element. 
  • C-Channel Lid Gasket - The distinctive designed gasket prevents leakage by creating an evenly distributed pressure force at its sealing contact points.  This non-leak seal is also used with the vacuum chamber lid.
  • Complete, Ready to Use System: Complete unit, mounted on a drip pan, with two filtration vessels, pump/motor assembly, ON/OFF switch, integral piping, and filtration element life indicators.     
  • Equipment Protection:  Protects rotating components and guards against particulate and/or water contamination.


Size (inches)
73 L x 16 W x 58 H
Size (millimeters) 1865 L x 370 W x 1470 H
700 pounds (318 kg)
Inlet Connection
2 inch NPT ball valve
Outlet Connection
1 inch NPT ball valve
Strainer Type / Mesh
Basket / 30 Mesh
System Flow
10 gpm (38 lpm)
2 HP (1.5 kW)
Positive Displacement Gear Pump
Filtration Element 4.2 micron [ISO 16889 (Beta 4.2 = 1000)]
1.0 micron [ISO 16889 (Beta 1.0 = 200)]
Water Removal Element Water removal Efficiency per Pass = 80%
Maximum Water Holding Capacity = 2.5 gallons (9 liters)
Materials of Construction Metals: Carbon Steel, Brass and Bronze
Seals: Buna-N
Maximum Allowable Working Pressure 100 psig at 250F (7.0 kg/cm2 ar 120C)
Controls Interface ON/OFF Manual Motor Starter Push Buttons
NEMA 4 Enclosure (moisture and dust proof)
Operating Voltage 460 VAC / 3 PH / 60 Hz / 4 Amps
Gauges and Indicators Pump Protection Vacuum Gauge
Range = 30" Hg / 3.5 kg/cm2 - 0" Hg / 0 kg/cm2

Pump Pressure Indicator Gauge
Range = 0 - 160 psig / 11 kg/cm2

Filtration Vessel Element Life Indicator
Range = 0-40 psid / 2.8 kg/cm2

Water Removal Vessel Element Life Indicator
Range = 0-40 psid / 2.8 kg/cm2 

Ordering Information

Part Number: KP10-2-S-V636

Consumable Spare Parts
A910269 Filtration Element (qty. = 1)
A910394 Water Removal Element (qty. = 1)
A629015 Filtration Vessel Lid Gasket (qty. = 1)
A629015 Water Removal Vessel Lid Gasket (qty. = 1)